Sony PMW-EX3 - Manual (Page 139)

Operating From the RM-B750/B150 139
Conn
ec
ti
ng Ex
te
rn
al De
v
ic
e
s
2
Select and set the menu items using the
MENU SELECT knob and the
CANCEL/ENTER switch.
3
When the settings are completed, set the
DISPLAY switch to ON or OFF to exit
the menu.
For details on operations of the RM-B150, refer to
the Operation Manual of the RM-B150.
Operating the menu from the RM-B750
Set the camcorder to Camera mode by setting the
power switch to the CAMERA position in
advance.
1
Press and light the MONITOR button
then press the VF MENU button.
The menu of the camcorder appears on the
RM-B750 display and the monitor screen
connected via the MONITOR connector of
the RM-B750.
2
Select and set the menu items, using the
MENU SELECT knob, ENTER button,
and CANCEL button.
3
When the settings are completed, press
the VF MENU button to exit the menu.
For details on operations of the RM-B750, refer to
the Operation Manual of the RM-B750.
Operating the Slow & Quick Motion
recording from the Remote Control Unit
When the Remote Control Unit is connected,
selection of “S&Q Motion” is enabled on the
CAMERA SET menu, and you can perform Slow
& Quick Motion recording from the Remote
Control Unit.
Before starting Slow & Quick Motion recording,
make the necessary settings on the menu.
1
Select “S&Q Motion” from the
CAMERA SET menu.
2
Set “Setting” to “On.”
The camcorder enters Slow & Quick Motion
mode.
3
Select the frame rate for recording with
“Frame Rate.”
4
Press the VTR/START STOP button.
Slow & Quick Motion recording begins.
To stop recording
Press the VTR/START STOP button.
To cancel Slow & Quick Motion mode
Set “Setting” of “S&Q Motion” of the CAMERA
SET menu to “Off.”
00:00
PP
Set t i ng
Frame Rate
Color Bar Type B
F l i c ker Reduce
Zoom Speed
I n t e r val Rec
Frame Rec
S&Q Mot i on
Rec Review : 3sec
: O f f
: 30
CAMERA SET
B
B
B
B
B