Yealink SIP-T32G - Manual (Page 82)

User Guide for the SIP-T32G IP Phone
72
You can create a conference with other parties using the phone’s local conference
feature. You can create a conference between an active call and a call on hold (on the
same or another line) by pressing the Conf soft key. The network conference feature
allows you to add and remove specific conference parties.
Note
The SIP-T32G IP phone supports up to 3 parties (including yourself) in a conference call.
This is called Local Conference and is the default method of conference.
To set up a local conference call:
1. Place a call to the first party.
2. Press the Conf soft key to create a new call
The active call is placed on hold.
3. Enter the number of the second party and press , , or the Send soft key.
4. When the second party answers the call, you can consult with him or her before
adding to the conference.
5. Press the Conf soft key again to join all parties in the conference.
To join two calls in a conference:
1. Place two calls using two different accounts on the phone (for example, place the
first call using account 1, and then place the second call using account 2).
2. Press or to select the call for conference and make sure the call is active
(for example, select the call on account 1).
3. Press the Conf soft key to join the two calls in the conference on account 1.
You can press the Hold soft key to place the conference on hold. You can press the Split
soft key to split the conference call into two individual calls. To drop the conference call,
press the Cancel soft key.
The network conference feature is not available on all servers. For more information,
contact your system administrator.