Yealink SIP-T32G - Manual (Page 100)

User Guide for the SIP-T32G IP Phone
90
Intercom is a useful feature in an office environment to quickly connect with the operator
or the secretary. You can press the intercom key to automatically connect with a remote
extension for outgoing intercom calls, and the remote extension will automatically
answer the incoming intercom calls.
Note
To configure an intercom key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Intercom from the Type field.
4. Select the desired line from the Account ID field.
5. (Optional.) Enter the intercom label in the Label field.
6. Enter the remote extension number in the Value field.
7. Press the Save soft key to accept the change or the Back soft key to cancel.
You can also configure an intercom key via web user interface at the path DSS Key.
To place an intercom call:
1. Press the intercom key when the phone is idle.
The phone is automatically connected to the extension specified in the Value field.
2. Press the intercom key again or the Cancel soft key to end the intercom call.
By default, the SIP-T32G IP phone supports to answer an incoming intercom call
automatically. The phone automatically plays a warning tone when it receives an
incoming intercom call. In addition, you can enable the phone to mute the microphone
The intercom feature is not available on all servers. Con tact your system administrator for
more information.