Cooper Instruments & Systems MasterLink 3000 Wireless Load Cell Amplifier - Manual (Page 16)

CF 187 14 RevA
Overload Limit You can enter a limit here above which Overload will
be shown on the display instead of the actual value.
Enter zero to disable this feature.This can be turned on
or off and will suppress leading zeroes when on.
Timeout
Enter the timeout in seconds. This sets the time
allowed without any data arriving from the viewed
module before all dashes are displayed on the LCD.
Should be at least 3 times the interval between the
data being transmitted by the acquisition module.
6.3 Connecting to the MasterLink 3000 Amplifier using Toolkit
Paired Data Tag and Paired ID of the MasterLink 3000 amplifier need to be entered into these
fields. These correspond to the Data Tag and ID of the MasterLink 3000 amplifier.