Cooper Instruments & Systems MasterLink 3000 Wireless Load Cell Amplifier User Manual

Page 14

CF 187

RevA

Items you can change:

Power On Auto Zero

Here you can determine whether the device performs

automatic zero when it is powered on.

Enter zero to disable this function.

If you enter a non-zero value then when the handheld

is first turned on it checks the value read from the

acquisition module. If this falls within ± of this value

then the display will be altered so this reads zero.

In its simplest form you could select two for a linear

calibration. For more complex calibrations which

include linearization select three to nine points.

Zero Indication Band

Using this setting you can mask tiny changes in input

after you press the Tare button.

Entering zero will disable this function.

Entering a non-zero value will provide a band within

which the display will always read zero.

Once the reading exceeds this value the real weight

will be displayed as no taring is taking place.