beautypg.com

Bio-Rad Quantity One 1-D Analysis Software User Manual

Page 5

background image

410-0201 Rev A

Page 5 of 7

“I am requesting a Network License Password Authorization for Quantity One Software
and /or PDQuest software” (as applies).

c- The second part of the message body text should state;

“ My registration information is...” and should include ALL OF THE INFORMATION THAT
IS FOUND ON THE PRINTED REGISTRATION FORM, INCLUDING THE 8-character
SYSTEM ID.

d- The second part of the message body text should state;

“ My purchase confirmation information is...” and should include;

The catalog number purchased

The purchase order number

The Bio-Rad order number

4- Send your request for a Network License Password to Bio-Rad at

[email protected]

Two or three days after you submit the Registration Form via Internet (potentially longer for non-
US customers) you will receive a network license password via an e-mail reply message. To
activate your full Network License password, start the Discovery Series software application from
any Remote Client computer, reopen the Software License screen in the software (go to the Help
menu and select Register) and click on the Enter Password button. Type the password into the
field and click on “OK”. \

!!! Critical Step- DO NOT enter the Network Password from the License Manager computer !!!

After your full license is activated, the Software License screen will reflect the fact that you have a
full license and will display the software version limit for this license and the number of
simultaneous users allowed.

Configuring Client Computers

After you have activated the non-temporary network license from one client computer, you are
ready to configure the other client computers to use the network license.

Review the instructions for installing The Discovery Series software on the Installation Guide or in
the Release Notes located on the CD.

Once you have installed The Discovery Series application, open the application. If the Software
License screen does not display, click Register in the Help menu. Then click Enter Password. In
the Enter Password dialog box, click Enable Network License then click Done. You must close
the application for it to reflect the changes. When you restart the application, it searches for the
NetHASP key. If the application cannot find the NetHASP key, the application notifies youand
continues in Basic mode.

Using NetHASP.ini

We recommend that the configuration file, Nethasp.ini, be installed on each client computer. This
file is not required; however, it is recommended because its use reduces the time needed for a
Discovery Series application to start on a client workstation configured for multi-user licensing. If
you want to use the NetHASP.ini file, copy it to the directory in which The Discovery Series
application is located (default: C:\Program Files\Bio-Rad\The Discovery Series\bin).

There are three broadcast options that a client workstation can use in order to locate a NetHASP
License Manager on the network, as indicated in the following table.