Great Plains 207-216K Operator Manual - Manual (Page 22)

204-085M-A Table of Contents Index 2014-02-12
18 UMRC Table of Contents Index Great Plains Manufacturing, Inc.
Troubleshooting
Problem Likely Cause Solutions
Too Much Residue at
Openers Cleaners set too high Lower cleaners.
Cleaner wheels not set
aggressively. Move single wheel forward.
Cleaner Wheels Do Not
Turn Cleaners set too high Lower cleaners.
Excessive residue clogging
wheels Change to less aggressive wheel placement
and/or reduce depth.
Bearings failed Re-pack or replace.
Tines Clogging With
Residue Excessive residue Use less aggressive placement and depth. if
using dual wheels, change placement to less
aggressive.
Cleaning too deep Raise cleaner height.
Conditions may be too wet Wait for dryer weather or don’t use row
cleaners.
Cleaners Lifting Off Stops Depth too great for conditions Raise cleaner height.
Row unit down-force too high Reduce down force or raise cleaners.
Cleaners Cutting Deep
Trench Depth too deep Raise cleaner height.