Great Plains CTA4000 HD Operator Manual - Manual (Page 63)

2012-11-28 160-037M
Great Plains Manufacturing, Inc. 59
Options
Blockage Detector
The seed monitor supports sensors that monitor for
plugging in the one-inch, secondary hoses. The package
includes programmable blockage modules for each tower
and flow sensors for each secondary seed hose. The
blockage modules signal the monitor when flow stops at
a sensor. The monitor then sounds an alarm and
identifies the problem hose.
To order blockage sensors, contact your Great Plains
dealer.
Hydraulic Bypass Kit
To operate the CTA4000HD, some tractors with
load-sensing closed-center, or constant-flow hydraulics
need a bypass valve.
Consult your tractor dealer for advice about your specific
tractor model.
See “Load Sensing Setup” on page 25 for operating
instructions.
Markers
Markers for this implement model are not provided by
Great Plains, but are available from at least one
third-party supplier. Consult your Great Plains dealer for
a current recommendation of brand and model.
Implement, Row Spacing
Part
Numbers
For use with ADC2350 Cart
CTA4000HD-8006, 6 in (15.2 cm) 168-408A
CTA4000HD-6575, 7.5 in (18.9 cm) 168-409A
CTA4000HD-5010, 10 in (24.8 cm) 168-410A
For use with ADC2220 or ADC1150 Cart
CTA4000HD-8006, 6 in (15.2 cm) 168-356A
CTA4000HD-6575, 7.5 in (18.9 cm) 168-357A
CTA4000HD-5010, 10 in (24.8 cm) 168-358A
Description Part Number
Tractor Hydraulic Bypass Kit 810-400C
16457
17987