3323-3326 wing hub and wheel assembly – Great Plains 4336 DH Predelivery Manual User Manual
Page 14

10
3323-4336DH
Great Plains Manufacturing, Inc.
556-100Q
05/22/2012
3323-3326 Wing Hub and Wheel Assembly
Refer to Figure 7
Note: Remove the assembly stands from center section and
allow unit to rest on the ground in the center of work ar-
ea.
13. Set pre-assembled wing frame section
on stands
that are tall enough to allow for installation of the pre-
assembled gang bars as shown. Model 3329 will be the
same as models 4330-4336, See “3329-4336 Wing” on
page 14.
Note: Be sure tab or notch of hub assembly plate
is in-
stalled on top.
14. Remove the 3/4 x 3 hex bolts
. Bolt the hub/spindle
assembly
to walking beam assembly
with the 3/4 x
3 hex bolts
, secure with 3/4 lock washers and 3/4
nuts.
Note: Instal tire/wheel
(11L-15, 8-ply tire/wheel assembly)
to hub assembly
with 9/16 lug nuts
.
15. Bolts may be tightened to specs, See “Torque Values
Figure 7
3323-3326 Wing Hub and Wheel
41617
5
3
4
7
2
1
6
U
D
F
B
L
R
1
2
3
4
3
5
4
6
3
7