Great Plains 2025P Operator Manual - Manual (Page 90)

2025P, 2020P Bedded, and
2010HDP
118-928M 8/14/2006
88
Refer to Figure 123
16. Enter the actual amount metered using
the Up/Down arrow keys. Press Func-
tion key to advance to next window.
Refer to Figure 124
17. A New calibration number is suggested,
along with the Old calibration number.
Refer to Figure 125
18. Press Function key to advance to win-
dow shown.
19. If you wish to keep the Old number, per-
haps to re-run the calibration procedure,
press the Down arrow key. If you want to
accept the New calibration number,
press the Up arrow key.
Figure 123
Figure 124
Figure 125
22730
22731
22729