Great Plains 2025P Operator Manual - Manual (Page 88)

2025P, 2020P Bedded, and
2010HDP
118-928M 8/14/2006
86
Refer to Figure 117
11. The cab console is informing you the
length of time that the drive will be operat-
ing, in order to meter the amount of seed
you have requested, at the calibration
number, drill width, and number of rows
you have selected. Press Function key to
advance to next window.
Refer to Figure 118
!
WARNING
The drive is about to operate, meaning there is a
danger of entanglement if anyone is in the drive
area. Be sure to verify that no one is near the drive
area before advancing to the next step.
Refer to Figure 119
12. Only after you have verified the drive area
is clear, press the up arrow key to initiate
calibration mode. If drive area isn’t clear,
press Down arrow key to exit calibration
mode.
Figure 117
Figure 118
Figure 119
22724
22723
22725