beautypg.com

Meter and sliding seed tube, Caution – Great Plains 2025P Operator Manual User Manual

Page 25

background image

8/14/2006

118-928M

23

Operating Instructions

Talc Lubricant (1# bottle P/N: 821-046C)
(5# jug P/N: 821-048C)

IMPORTANT!

All talc is not created equal, use Great Plains brand talc
for optimum seed flow.

Talc lubricant is mandatory for all seeds, especially
treated or inoculated seed.

Recommended usage:

For clean seeds sprinkle (1) one cup of talc per 3
bushels of seed.

For seed with excessive treatment, or for humid planting
environments, double or triple talc rate as needed.

!

CAUTION

Do not use hands or any part of your body to mix talc
lubricant.

Graphite Lubricant (P/N: 821-042C)

IMPORTANT!

For Milo Planting Only
Powdered graphite must be mixed with the milo seed in
combination with talc for proper seed singulation.

Recommended usage:

For clean seeds sprinkle (1) one cup of graphite per 9
bushels of seed.

For seed with excessive treatment, or for humid planting
environments, double or triple graphite rate as needed.

!

CAUTION

Do not use hands or any part of your body to mix graphite
lubricant.

Graphite Powder (1# bottle P/N: 821-042C)
(5# jug P/N: 821-060C)

IMPORTANT!

For Finger Pick Up Meters Only
Use only approved Graphite Powder available from
Great Plains Mfg. Inc. or Precision Planting to ensure
proper lubrication of finger pick-up corn seed meters.

Recommended usage:

For finger pick up meters, add (1) one teaspoon of
graphite for each 4 units of seed corn (320,000 kernels).

In high humidity conditions or if you are using seedbox
seed treatments, or seed corn treated with any insecti-
cides or polymers (Poncho, Prescribe, Cruiser, etc.),
add one teaspoon of graphite for each unit of seed corn
(80,000 kernels).

!

CAUTION

Do not use hands or any part of your body to mix graphite
lubricant.

Meter and Sliding Seed Tube
Refer to Figure 16

Before operation, make sure you are using the correct seed
meter wheel for the seed you are using.

For information on meter adjustments, refer to “Seeding Rate”,
page 38.

If your drill has been exposed to the elements for a period of time
with seed in the boxes, check to make sure the seed in the seed
tubes and meters has not become wet.

Figure 16

Seed Meter

Seed

meter

Sliding

Seed tube

18286

Spring-loaded
idler

Opener
seed tube

This manual is related to the following products: