Entering rs-232 commands, Entering commands manually, Entering commands using shortcuts – ClearOne Musica Tools User Manual
Page 29
PN: 020002
6-1
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 /
www.netstreams.com.
Chapter
6
Entering RS-232 Commands
You can enter RS-232 commands two ways from MusicaTools: manually and through
shortcuts.
Entering Commands Manually
To enter commands manually:
1.
Read the Musica MU5066 RS-232 Integration Manual for RS-232 codes.
2.
Enter the commands in the manual entry window.
3.
Click inside the manual entry window and select Enter.
Commands are transferred to the monitor window.
Entering Commands Using Shortcuts
To enter commands using shortcuts:
1.
Read the Musica MU5066 RS-232 Integration Manual for RS-232 codes.
2.
From the pulldown list to the left under the manual entry window, select the
command you want to enter:
State - version, source, IR frequency
Chang - source, IR frequency
Nudge - Single adjustments in one direction, source
3.
From the pulldown list to the right under the manual entry window, select the sub
command you want to enter.
4.
Select Copy.
Commands are copied to the manual entry window.
5.
Click inside the manual entry window and select Enter.
Commands are transferred to the monitor window.
6.
Edit as necessary.