ClearOne Musica Tools User Manual

Page 27

Controlling Keypads

PN: 020002

5-3

Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496

3600 W. Parmer Lane, Suite 100; Austin, TX 78727 /

www.netstreams.com.

Table 5-2

Keypad Selections (2)

Selection

Entry

Source

Choose the source for the keypad (this is the source you are about to name
in the next field).

Nm (Name)

Choose from a list of names for the keypad stream (CD, AUX, Tape, Tuner,
etc.)

Ext IR

Either 56 or 38 kHz signal (depending on source).

Amp Out

I = Internal Amp (keypad amp only).
I + E = Internal amp and an external amp connected by the EIM port.
EV = External amp only (variable output).
EF = External amp only (fixed output).

Speaker

Choose from 4, 6, or 8 ohm speakers.

Preset

Up to eight presets can be configured for the keypad tuner. Select the
number you want (1-8) as the preset for these settings.

Nm (Name)

Preset name. Choose from a list of names for the selected keypad tuner (see
the Musica MU5066 Installation and User’s Guide for a list of pre-defined
preset names).

Frequency setting (for a selected preset on a tuner).

Spacing

50,100,200 - the frequency spacing (in kHz) between stations on a tuner. 50
and 100 kHz are typically used in Europe and 200 kHz is used in North
America.

Emphasis

50 or 75 - the time spacing (in microseconds). Use 50 microseconds for
Europe, and 75 microseconds for North America. This helps to improve the
signal to noise ratio for FM broadcasting.