ClearOne Musica Tools - Manual (Page 17)

Installing and Running MusicaTools
PN: 020002 2-11
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Figure 2-14 Monitor window information
Table 2-2
Settings
Area Command/Function Definition/Setting
Port Signifies which COM port to use for
connection. To verify your COM port,
go to Start>Control Panel>
System>Hardware>Device
Manager on your PC and expand
Ports (COM&LPT).
Baud Denotes the Baud rate of the serial
port of the ADC. Must always be
9600.
DataBits Must always be set to 8.
Parity Must always be set to none.
Stop Bits Must always be set to 1.
TX Flow Control CTS Not Used
DSR Not Used
Xon/Xoff Not Used
Tx when Rx Xoff Not Used
Q Size Not Used
TO Const Not Used
TO Mult Not Used
Check all Sends Not Used
Rx Flow Control RTS Online
DTR Online
Xon/Xoff Not Used
Gate on DSR Not Used
Q Size Not Used
H. Water Not Used
L. Water Not Used
Auto re-open Not Used
Xon Code DC1
Xoff Code DC3
Display Display in hexadecimal Not Used
Break line on ASCII char Not Used
CR Not Used
Break line every __ chars. Not Used