ClearOne Musica Tools - Manual (Page 26)

MusicaTools User’s Guide
5-2 PN: 020002
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
4. Click the Setting button.
More keypad options display (see Figure 5-2).
Figure 5-2 Room 1 keypad (screen 2)
5. Enter information as described in Table 5-2.
Table 5-1
Keypad Selections (1)
Selection Entry
Source Choose the source for the keypad (off, 1-4, EXT, FM, N).
Color 1 = blue (or amber in some models) background
2 = white (or green in some models) background
Bright 0 through 100. Increases or decreases keypad brightness.
Volume 0 through 35. Increases or decreases volume.
Balance You can adjust balance by selecting L1 through L7 (to provide more or less
sound from the left channel) or by selecting R1 through R7 (to provide more
or less sound from the right channel). Selecting 0 balances both channels
equally.
Mute Selections turn sound On or Off.
Loud Turns loud contour On or Off.
3D Turns 3D contour On or Off.
Eq 100Hz through Eq 10 kHz Allows you to adjust the 5-band equalizer by selecting settings of -12 through
+12 for each band.
FM Feq (kHz) If the source is a keypad tuner, you can adjust the frequency that the keypad
defaults to.
Preset Up to eight presets can be configured for the keypad tuner. Select the
number you want (1-8) as the preset for these settings.
Mode MT = Manual Tuning
SE = Seek
SC = Scan
PR = Preset Scan
Tuning Down, Up, or Stop. Allows you to adjust the keypad to search in ascending
or descending order or to stop searching.
Sensitivity Selects how sensitive a tuner is while scanning or seeking. You can select a
Low, Middle, High tolerance for sensitivity.