Canon IMAGEFORMULA DR-2010M - Manual (Page 24)

20
[Output settings] tab
Configure settings for the output method. The items that appear in
this tab differ depending on the [Output method] selected.
[Scanner setting] tab
Configure scan conditions.
[Button assignment] tab
Configure settings to assign the job to a job button on the scanner.
If [Assign scanner button 1 to Scan First] is selected in the main
screen, assignment to job button 1 is not available.
4
Click the [OK] button.
The job is registered according to the configured settings and
appears in the job list.
To confirm the settings of a registered job or to change the
settings, click the [Job list/edit] button.