Cumberland Stove Works MF3700 - Manual (Page 23)

INSTALLATION AND OPERATION MANUAL
Models MF3700, MF3800
Page 3 800-345-6007 CumberlandStoveWorks.com
When the unit is cleaned out, empty the hopper, take the
venting apart and clean out the fly ash. Then rinse and
let dry. Inspect the draft blower and clean out all areas.
Clean the glass, doors and outer cabinet so that you are
ready for the next heating season. The use of an ash
vacuum makes cleaning easier and faster.
TROUBLESHOOTING & REPAIR
At Ardisam, we build quality and durability into the design
of our products; however, no amount of careful design
by us, and careful maintenance by you, can guarantee a
repair-free life for your stove. Most repairs will be minor
and are easily fixed by following the suggestions in the
troubleshooting guide in this section.
The guide will help you pinpoint the causes of common
problems and identify remedies.
For more complicated repairs, you may want to rely on your
retailer, an authorized service center, or Ardisam, Inc. A
parts catalog is included in this section.
We will always be glad to answer any questions you have,
or help you find suitable assistance. To order parts or inquire
about warranty, call or write us at the address found below,
under the section “Ordering Replacement Parts.”
ORDERING REPLACEMENT PARTS
Parts can be obtained from the store where the stove was
purchased or direct from the factory. To order from the fac-
tory call, write or e-mail to:
Ardisam, Inc.
1160 Eighth Avenue, Cumberland, Wisconsin 548
1-800-345-6007 • 1-715-8-415
E-mail: [email protected]
Please include the following information with your order:
1. Part numbers
2. Part description
3. Quantity
4. Model number and serial number
Figure 25: Air filter placement.
AIR FILTER
AIR FILTER
Replace air filter annually. Replacement filters can be
ordered through your stove dealer. Clean air filter (730008);
regularly replace if needed.
Figure 26: Removable fireplate. NOTE: notch should be toward
the front of the stove.
Notch
• Remove the combustion motor and clean impellers and
motor housing of any fly ash.
• Vacuum the stove cavity to clear it of any fly ash or
debris.
• Remove the exhaust venting and use a brush to clear
all soot, ash and debris.
• Inspect all rope gaskets around the front door and ash
pan.