LaMotte 5 Series TDS Meter - Manual (Page 24)

Select Single Point Calibration.
Choice of “Yes” or “No”.
Default value is “Yes”.
User reset to factory defaults.
Choice of “Yes” or “No”.
Default value is “no”.
Overview of Advanced Set-Up
Overview of CON 6 Set-Up Menu
%
C °
Meter Off
Press ON/OFF and MODE buttons
simultaneously for 2 seconds, release
ON/OFF button first then release MODE
key button a second later.
A "StUP" indicator will appear for 1.5
seconds before showing the first menu
ON
OFF
MODE
24