LaMotte Tracer Salt Meter - Manual (Page 18)

Function/
Resulting Action
Power Mode
Key Press
Sequence
Change
Measurement
Mode On Any Press and hold the
MODE/HOLD button
for at least 2 seconds
Modes will scroll by
until button is released
Enter CON/TDS
Ratio On TDS
(ppm or
mg/L) Press and release the
CAL/RECALL button
twice in succession
Change
CON/TDS
Ratio On TDS
(ppm or
mg/L) Momentary press of
MODE/HOLD button.
Each press increases
ratio by 0.1 from 0.4 to
1.0.
Exit
CON/TDS
Ratio On TDS
(ppm or
mg/L) Momentary press of
CAL/RECALL button.
Change
TemperatureUnits Off Off Press and hold
CAL/RECALL button
then momentarily press
ON/OFF button.
Release CAL/RECALL
button after“Self Cal” is
displayed.
Override Auto
Power Off On Any
Measurement
Mode Momentarily press
CAL/RECALL button
then simultaneously
press and hold ON/OFF
and MODE/HOLD
buttons for 2 seconds
until “oFF” is displayed.
Default Reset Off N/A Simultaneously press
ON/OFF,
CAL/RECALL and
MODE/HOLD buttons
momentarily. “dFlt”
will be displayed.
18