OSRAM SYLVANIA LEDstixx Strip - Manual (Page 4)

4
2.3 LEDstixx Strip Lighting System Wiring Diagram:
FIGURE 3: Wiring Diagram
3.0 PRODUCT RELATED INFORMATION:
3.1 List of Applicable and Related Documents:

Document #LED233- LEDstixx Strip Product Information Bulletin

Document # ECS050R12 - OPTOTRONIC® Electronic 24V DC LED Power Supplies

Document # ECS133 - OT96 Installation Guide

Document # ECS128 - OT240 Installation Guide

Document # LED026 - Determine the Maximum LED Load on the Constant Voltage Power
Supply

Document # LED126 -Remote Wiring Distances for LED Power Supplies

Document # LED157 - LEDstixx Lighting System Warranty
3.2 Responsibilities and Considerations:
3.2.1 Owner/User Responsibilities:
It is the responsibility of the contractor, installer, purchaser, owner, and user to
install, maintain, and operate the LEDstixx
® Strip Lighting System in such a manner
as to comply with all state and local laws, ordinances, regulations, and the
American National Standards Institute Safety Code.
3.2.2 Installation Configurations:
When planning a LEDstixx Strip Lighting System installation, SYLVANIA suggests
doing the following:

Consult an Electrical Inspector to approve all wiring plans.

Refer to local and state codes for installation compliance.

Consult SYLVANIA Customer Service Center (1-800-LIGHTBULB).
.
OSRAM is a registered trademark of OSRAM GmBH
Specifications subject to change without notice
© 2012 OSRAM SYLVANIA Inc.