OSRAM SYLVANIA LEDstixx Strip - Manual (Page 2)

2
1.0 MECHANICAL INSTRUCTIONS
1.1 Sample Bill of Materials:

24 VDC, Class 2, UL Listed power supply

LEDstixx Strip LED linear lighting system available in 3 and 4 feet configurations, in
3000K and 4000K CCT. See Product Information Bulletin (PIBxxx) for part numbers,
descriptions, and specifications.

Mounting Clip Assembly, comes in quantities of 2 clips with screws per LEDstixx
Strip.
FIGURE 1: System Components Pictorial Diagram
1.2 Tools Required:

Phillips and/or flat blade screwdrivers

Needle nose pliers

Wire cutters/strippers

Tape measure

Eye protection
1.3 LED Assembly Installation:
1.3.1 The units come with mounting clips and screws for easy installation.
1.3.2 The mounting clip accommodates 180° angular rotation feature for aiming.
Caution: The engagement strength of the mounting clip is designed to handle the weight of the
product when the product is installed in a permanently located case. It is not designed to handle
potential forces from shock and vibration to which the product might be subjected during transit
should it be pre-installed inside a case. During transit of an assembled case, the LED assembly
must be removed from the mounting clip, packaged, and shipped separately from the case.
.