Unitec C-Start Installation Manual - Manual (Page 6)

C - S T A R T
Document Number: CST1001 2
1.1 Positioning the C-Start
When installed at the wash entrance, the C-Start should be located at least 12 feet
from the wash. For curb mount applications, the front surface of the C-Start should
be even with the edge of the curb. To achieve this dimension, the base frame should
be installed so its leading edge is 7 in. from the edge of the curb as shown in the
figure 1.
Figure 1. C-Start Position
Document Name: C-Start Installation Manual