Unitec C-Start Installation Manual - Manual (Page 20)

C - S T A R T
Document Number: CST1001 16
Appendix B - C-Start Networking
Unitec supplies a pre-programmed router for connecting devices as a local network.
The networked devices will vary based on options ordered and may include:
• One or more C-Start units
• A C-Start Console
• A POS Interface device (to communicate with a C-store POS System)
• A print server (for connecting a local report printer)
In cases where there will be more than (4) Unitec devices on the network, an
Ethernet switch will need to be added. The WAN port of the switch connects to one
of the LAN ports of the Unitec router. The additional devices can then be connected
to the LAN ports of the switch.
The illustration below provides a sample network diagram.
Example of Networked Unitec Devices
Document Name: C-Start Installation Manual