Unitec C-Start Installation Manual - Manual (Page 24)

C - S T A R T
Document Number: CST1001 20
7. Place the wired plug into the crimping tool. Give the handle a firm squeeze. You should
hear a ratcheting noise as you continue. Once you have completed the crimp, the handle
will reset to the open position. To ensure all pins are set, some prefer to double-crimp by
repeating this step.
8. Repeat all of the above steps with the other end of the cable. Test the cable to ensure
that it will function in the field. Mis-wired and incomplete network cables could lead to
headaches down the road. Also, crossed wire pairs could lead to physical damage of
computers or phone system equipment, making it even more crucial that the pairs are in
the correct order. A simple cable tester can quickly verify that information for you. Should
you not have a network cable tester on hand, simply test connectivity pin to pin.
Document Name: C-Start Installation Manual