Tweco Victor Torch Handles,Cutting Attachments - Manual (Page 6)

2-2
warning
Service or repair of apparatus should be performed only by a
qualified repair technician capable of servicing gas apparatus in
strict accordance to applicable Part and Service bulletins for Victor ®
manufactured products. Improper service repair, or modification of
the product could result in damage to the product or injury to the
operator. Improper service repair, USe of non-genUine ViCtor ®
PartS, or modification could result in damage to the product or
injury to the operator.
warning
This product contains chemicals, including lead, or otherwise
produces chemicals known to the State of California to cause cancer,
birth defects and other reproductive harm. wash hands after
handling. (California Health & Safety Code § 25249.5 et seq.)
sectIoN 2:
GeNeRAL sAFetY INFoRMAtIoN
Read and understand all safety and operating instructions provided before
using this apparatus. RetAIN these INstRUctIoNs IN A ReADILY
AvAILABLe LocAtIoN FoR FUtURe ReFeReNce.
2.01 FIRe pReveNtIoN
Welding and cutting operations use fire or combustion as a basic tool. The
process is very useful when properly controlled. However, it can be extremely
destructive if not performed correctly in the proper environment.
1. The work area must have a fireproof floor.
2. Work benches or tables used during welding or cutting operations
must have fireproof tops.
3. Use heat resistant shields or other approved material to protect
nearby walls or unprotected flooring from sparks and hot metal.
4. Keep an approved fire extinguisher of the proper size and type
in the work area. Inspect it regularly to ensure that it is in proper
working order. Know how to use the fire extinguisher.