Tweco SP 2001 Spool Gun - Manual (Page 4)

INTRODUCTION
How To Use This Manual:
This Owner’s Manual usually applies to just the
underlined specification or part numbers listed on
the cover. If none are underlined, they are all
covered by this manual.
To ensure safe operation, read the entire manual,
including the chapter on safety instructions and
warnings.
Throughout this manual, the words WARNING,
CAUTION, and NOTE may appear. Pay particular
attention to the information provided under these
headings. These special annotations are easily rec-
ognized as follows:
WARNING gives information re-
garding possible personal in-
jury. Warnings will be enclosed
in a box such as this.
CAUTION refers to possible equipment
damage. Cautions will be shown in bold
type.
NOTE offers helpful information concerning
certain operating procedures. Notes will be
shown in italics.
Equipment Identification:
The unit’s identification number (specification or
part number), model, and serial number usually
appear on a nameplate attached to the machine.
Equipment which does not have a nameplate at-
tached to the machine is identified only by the
specification or part number printed on the shipping
container. Record these numbers for future refer-
ence.
Receipt Of Equipment:
When you receive the equipment, check it against
the invoice to make sure it is complete and inspect
the equipment for possible damage due to shipping.
If there is any damage, notify the carrier immedi-
ately to file a claim. Furnish complete information
concerning damage claims or shipping errors to
Thermal Arc, Order Department, 2200 Corporate
Drive, Troy, Ohio 45373-1085. Include all equip-
ment identification numbers as described above
along with a full description of the parts in error.
Additional copies of this manual may be pur-
chased by contacting Thermal Arc at the address
given above. Include the Owner’s Manual number
and equipment identification numbers.
430429-287
INTRODUCTION
October 27, 1997 Revised 1-1