Tweco A60 Cutmaster - Manual (Page 98)

CUTMASTER A60
PARTS LIST Manual 0-4981 6-2
6.04 Replacement Power Supply Parts
Qty Description Catalog #
1 Regulator 9-0115*
1 Filter Assembly Replacement Element 9-0116
1 Input Power Cord for 208 / 230 V Power Supply 9-8596
1 Input Power Cord for 400 V Power Supply 9-0218
1 Input Power Cord for 460/600 V Power Supply 9-8593
NOTE
*9-0115 regulator, If the serial number of the power supply is prior to #05078755 then kit number 9-0201 will be
needed to replace not only the regulator (9-0115) but the logic PCB as well. Another way to tell if the kit is needed is
to see if the regulator has a small diameter tube coming out of the bottom fitting. If there is a transducer and wire
harness instead of the tube, the kit is not needed.
6.05 Options and Accessories
Qty Description Catalog #
1 Single - Stage Filter Kit (includes Filter & Hose) 7-7507
1 Replacement Filter Body 9-7740
1 Replacement Filter Hose (not shown) 9-7742
2 Replacement Filter Element 9-7741
1 Two - Stage Filter Kit (includes Hose & Mounting Screws)
1 Bracket, Filter Mounting (not shown)
1 Two - Stage Air Filter Assembly 9-7527
1 First Stage Cartridge 9-1021
1 Second Stage Cartridge 9-1022
1 Extended Work Cable (50 ft / 15.2 m) with Clamp 9-8529
1 Multi - Purpose Cart 7-8888
1 Automation Harness for Start/Stop and OK to move 9-9385
1 25' / 7.6 m CNC Cable for Automation Interface Kit 9-1008
1 35' / 10.7 m CNC Cable for Automation Interface Kit 9-1010
1 50' /15.2 m CNC Cable for Automation Interface Kit 9-1011
1 Nylon Dust Cover 9-7071
Optional Single - Stage Filter Kit Optional Two - Stage Filter Kit