Tweco 200 XT Auto-Cut 400V - Manual (Page 45)

3:15 Fill Cooling System
1. Fill the coolant tank to the level shown, with Thermal Dynamics coolant. The coolant level is visible
through the translucent coolant tank. The amount of coolant required varies with torch leads length.
2. Replace the cap on the tank.
Coolant Capabilities
Cat. Number and Mixture Mixture Protects To
7-3580 ‘Extra-Cool TM ’ 25 / 75 10° F / -12° C
7-3581 ‘Ultra-Cool TM ’ 50 / 50 27° F / -33° C
7-3582 ‘Extreme Cool
TM
’ Concentrate* -65° F / -51° C
* For mixing with D-I Cool TM 7-3583
Art # A-11463
Fill Range
Coolant Tank
2. After the complete system has been installed, check that the coolant has been pumped through the system
as follows (see NOTE):