Trebor REV6 - Manual (Page 33)

REV6 OPERATION / MAINTENANCE MANUAL 33 CONTENTS
9 APPENDIX
9.1 Regulatory Status
9.1.1 CE Marking
Machinery Directive 2006/42/EC (Safety)
EMC Directive 2004/108/EC Electromagnetic Compatibility
The Rev6 pump, in its various configurations as listed below, is in conformity with the above-mentioned
European Directives.
Part Name Description
Rev6A0 Pump casing consisting of various fittings and o-rings
See F0117C
98004270 Bearingless motor
See DC-4003-03, Rev05
98004271 Standalone Controller with 48 VDC, 600 W supply inputs (galvanic separated from high
voltage side)
See DC-4003-03, Rev05
Accessories Motor controller adapter cables of various lengths, air-cooling module, and others.
See DC-4003-03, Rev05
Machinery Directive 2006/42/EC:
The machinery directive essentially has been followed by a risk analysis, according mitigation actions
and a user manual for safe operation. For design and testing, the following standards are used as a
guideline:
EN 809 Pumps and pump units for liquids: basic requirements are followed.
EN 12162 Liquid Pumps
– Safety Requirements - Procedure for hydrostatic testing: used for maximum static
pressure testing of pump.
ISO 12100 Safety of machinery – principles for risk assessments: used for system risk analysis.
EMC Directive 2004/108/EC:
The following standards of the EMC directive are tested and confirmed at a certified laboratory:
EN61000-6-2 Generic standards, Immunity for industrial environments
EN61000-6-4 Generic standards, Emission standard for industrial environments
Test Laboratory: Hochschule für Technik Zürich
EMV Labor, Technoparkstr. 1
CH-8005 Zurich, Switzerland
Swiss certification number = STS 404