Trebor REV6 - Manual (Page 24)

REV6 OPERATION / MAINTENANCE MANUAL 24 CONTENTS
Table 8 – Description of “USER INTERFACE” Connector
Pin
Pin
Number
Function Name Levels Note
Signal 5
Analog In
Reference
Speed
4-20 mA = 0-10000 rpm
Upper Speed Limit = 9000 rpm
≈ 18.4 mA
Lower Speed Limit = 300 rpm
Direct connection, no protection.
Galvanic isolation on the user side is
required.
Ground 6
Signal 3
Digital In Enable
24 V → active
0 V → not active Needed to enable the system with an
external signal. Ground 4
Signal 1
Digital
Out
Status
Relay closed → active, system
on
Relay open → not active,
system off
This signal indicates if the system is
active.
Ground 2
Figure 21 – “USER INTERFACE” Connector
-
Delivered with Controller
-
Connector Type: AK1550/06-3.81-Green
Figure 22 – “USER INTERFACE” Pin Numbering