Sound Devices PIX 250i - Manual (Page 49)

PIX 250i User Guide
43
N
etw
or
k Gr
ouping
5. Repeat step 4 for all units in the group. Now when jumping to a cue marker on one unit all
units in the group will also jump to the cue point and remain in sync.
To loop between cue points on grouped units:
1. With Loop Mode on and Cue Markers all set, locate the cue point in which the loop will
begin.
2. Press Play + Fast Forward to change the Loop behavior from Loop Clip to Loop Segment
mode. The OSD will display the loop points (for example Cue 1 - Cue 2).
3. Repeat step 2 on all units in the group. All units in the group will now loop between the
selected cue points and remain in sync.