Recor ding, Audio track arming – Sound Devices PIX 250i User Manual
Page 31

PIX 250i User Guide
25
Recor
ding
frame rate. The best practice is to test the audio/video sync using a clapper slate on a test file for
each camera resolution/frame rate to be used on a project before starting.
See Audio Input Delay Con-
trol for details
Audio Track Arming
Up to 16 Tracks of audio can be recorded. Tracks must be armed in the Audio Screen in order for
them to be recorded. Armed audio tracks will have a red background in the Arm column. Unarmed
audio tracks will have a black background in the Arm column. To arm or disarm Tracks for record-
ing:
1. Press AUDIO to access the Audio Screen.
2. Rotate the Control Knob to select the desired track.
3. Press the Control Knob to focus the highlighter on the selected track’s parameters. The high-
lighter will become orange and focus on a single column in the track.
4. Rotate the Control Knob to highlight the Arm column (The Arm column is the left-most col-
umn and displays the track number).
5. Press the Control Knob to access the Arm Menu. Turn the Control Knob to select On, Off,
All On
, or All Off. (All On and All Off will change the arming status of all tracks, regardless
of which track is selected).
Changing a track’s Input Source to Off will disarm the track.