Panel descr ip tions – Sound Devices PIX 250i User Manual
Page 10

PIX 250i User Guide
v. 2.10
Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
4
Panel Descr
ip
tions
6)
Digital Audio Input/Output (DB-25)
8 channels of AES digital audio input and
8 channels of AES digital output. Out-
puts configured with Setup Menu option
[Audio - Line Output]. (
7)
Analog Audio Outputs (XLR)
2 channels of balanced, line-level analog
audio outputs. Same signal as DB-25 Ana-
log Audio outputs channels 1 and 2.
8)
Analog Audio Inputs (XLR)
2 channels of balanced, line-level analog
audio inputs. If both XLR and DB-25
signals are connected, the signal will be
combined.
9)
Ethernet (RJ-45)
Attaches to 1G or 100M Ethernet net-
works. Provides Network Grouping (
cess for remote control (
), and network file
10)
RS-422 Control (DB-9)
Connects to RS-422 Controllers for exter-
nal control of the PIX 250i. (
11)
GPIO Remote (Phoenix 10-pin)
Logic contact points for remote control.
See “GPIO (General Purpose Input / Out-
12)
SDI Video Input (BNC)
SDI video input. Accepts 3G-SDI, HD-
SDI, or SD-SDI signal with up to 16 chan-
nels of embedded audio.
13)
SDI Video Output (BNC)
SDI video output. Provides 3G-SDI, HD-
SDI, or SD-SDI signal with up to 16 chan-
nels of embedded audio.
14)
HDMI Video Input (HDMI)
Accepts HDMI (1.4a) signal with 8
channels of embedded audio. The PIX
250i does not record or display content
encoded with HDCP.
15)
HDMI Video Output (HDMI)
Provides HDMI (1.3) signal with 8
channels of embedded audio. Audio
configured with Setup Menu option
[Audio - HDMI/AES Output].
16)
USB Connection
Connect to a Windows computer to load
firmware with PIX Loader software
(Available on the Sound Devices website).
(
See “Setup Management and Firmware
Upgrades”, page 68
)