HF scientific AccUView UV %Transmission Monitor - Manual (Page 29)

7.18 Saving Configuration Settings
If extended settings is set to OFF, pressing the
↵
button will save all settings and the
AccUView will automatically return to the normal AUTO mode of the instrument.
If extended settings is set to On, after the last menu of the extended settings, pressing the
↵
button will save all settings and the AccUView will automatically return to the normal
AUTO mode of the instrument.
The CONFIG menu may be used at any time to reset or change any of the parameters.
The CONFIG menu may be exited at any point in the menu by using the MODE/EXIT
key. Any features that have been modified will be saved.
While the operating in CONFIG mode the reading before entering that mode is held.
AccUView (6/10)
Rev. 4.0 24