HF scientific AccUView UV %Transmission Monitor - Manual (Page 25)

7.6 Enabling the Security Access
The instrument is equipped with a security access. If this option is turned on, the user is
required to input the access code into the instrument to get to any mode other than AUTO.
The only code is 333. This code may not be changed. See section 4.3 for more
information on this security feature. The security key icon will be visible and flashing on
the display whenever the access option is selected using the
t or u buttons. (On or
OFF).
7.7 Extended Settings
The last few settings are grouped together to prevent them from being adjusted by
accident. To gain access to the extended settings, select On using the
t or u buttons and
press the
↵ button.
7.8 Speed of Response
The speed of response for both displayed and output values can be adjusted in this menu.
The factory setting is 3 however, 10 response speeds are available. Select the desired
speed of response using the
t and u buttons. Press the ↵ button to accept it.
Please note that the response is simply an average of the previous readings combined with
the current reading. If the setting is 1, only current readings are displayed. If the setting is
10, the last 9 readings are averaged with the current reading.
AccUView (6/10)
Rev. 4.0 20