HCO SG560C - Manual (Page 9)

HCO ScoutGuard SG560C
2 Cautions
Page 6
2 Cautions
★ The working voltage of the camera is 6V. The camera is powered
by four or eight AA batteries.
★ Please install batteries according to shown polarity.
★ Please unlock the write-protect before inserting the SD-card.
★ Please insert the SD-card when the power switch is at OFF
position before setting up the camera. The camera has no
internal memory for saving images or videos. If no SD-card is
inserted, the camera will shut down automatically.
★ It is recommended to format the SD-card by the camera when
used at the first time.
★ In the SETUP mode, the camera will shut down
automatically after 3 minutes if no operation is done.
Please turn on the power again if you want to continue to work
with the control.
★ Please avoid put the camera in a damp place. If you don’t use
the camera, please take out the battery and lock the camera.