HCO SG560C - Manual (Page 13)

HCO ScoutGuard SG560C
3 Quick Introductions
Page 10
non-zero value, the camera starts to work at a preset time interval.
User need to OFF the PIR Trigger if they want the camera work
only with Time Lapse function.
3.5.3 PIR& Timer triggering
If user want both PIR triggering and Timer triggering, the user
needs to set PIR Trigger to ON and set Time Lapse to a desired
non-zero value. The camera will capture pictures or videos in a
preset time interval even there is no motions get detected and it
will also capture pictures and videos if motions get detected.
3.6 Power Off
Switch the camera to OFF position to power off the camera.
Please note that even in the OFF mode, the camera still consumes
certain power at μA level. Therefore, please remove the battery if
the camera will not be used for a long time.