HCO SG560C - Manual (Page 10)

HCO ScoutGuard SG560C
3 Quick Introductions
Page 7
3 Easy Operations
3.1 Power Supply
Use 8 or 4 AA batteries or 6v external battery for power supply.
Install the fully charged batteries into the depot according the
polarities sign shown. The following batteries with 1.5V output can
be used:
1. High-density and high-performance alkaline batteries
(Recommended)
2. Rechargeable alkaline batteries
3. Rechargeable NiMH batteries
When in low-battery state, camera will be automatically shut
down after the indication LED flashing for a while. Please change
the batteries in time.
3.2 Insert the SD-card
The camera has no internal memory for saving images or
videos. If no SD-card is inserted or SD-card is locked, the
camera will shut down automatically.
3.3 Power on and Entering into the ON Mode
The Camera has three basic operation modes:
1. OFF mode: to turn off the camera.
2. SETUP mode: to set operational parameters, or to
playback the photos or video clips via display screen or via
TV.
3. ON mode: to work under surveillance state.
After switching the camera to ON position, the motion