HCO SG560C - Manual (Page 18)

HCO ScoutGuard SG560C
4 Advanced Operations
Page 15
more easily to be triggered by motion, taking more pictures or
recording more videos. It is recommended to use high sensitivity
degree in room or environment with little interference, and to use
lower sensitivity for outdoor or environment with lots of
interference like hot wind, smoke, near window etc. Furthermore,
the sensitivity of the PIR is strongly related to the temperature.
Higher temperature leads to lower sensitivity. Therefore it is
suggested to set a higher sensitivity for high temperature
environment.
The following shows how to set PIR sensitivity as Low provided
that the previous option is Normal.
a) Press MENU to display the setting menu.
b) Press “▲” or “▼” to select Sensitivity.
c) Press “►” to select Low.
d) Press OK to save the current setting and the option will be
un-highlighted.
Press MENU to return to info display.
Please note that if the time lapse is set to OFF the PIR
can’t be set to OFF.
4.1.8 Set PIR Triggering Interval
This parameter means that how long the PIR (Passive Infrared
motion sensor) will be disabled after each triggering in ON mode.
During this time the PIR of the device will not react to the motion
of human (or animals). The minimum interval is 0 second, it
means the PIR works all the time. The maximum interval is 1 hour,