HCO SG560C - Manual (Page 17)

HCO ScoutGuard SG560C
4 Advanced Operations
Page 14
b) Press “▲” or “▼” to select Video Length.
c) Press “►” to increase to 15 Seconds.
d) Press OK to save the current setting and the option will be
un-highlighted.
Press MENU to exit.
4.1.6 Set Time Lapse
This camera has time lapse function，which means the camera
can capture images or videos at a preset time intervals regardless
of whether there are motions get detected. The default parameter
is OFF which means the timer function is disabled. When
changing this parameter to a non-zero value, it starts to take
photos at given time interval.
The following shows how to set timer interval to 1 hour
provided that the previous value is OFF.
a) Press MENU to display the setting menu.
b) Press “▲” or “▼” to select Time Lapse.
c) Press “►” to decrease or increase to 1 hour.
d) Press OK to save the current setting and the option will be
un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.7 Set PIR Trigger
This parameter defines the sensitivity of the PIR. There are
four parameters: High, Normal, Low and PIR off. The default
value is “Normal”. The higher degree indicates that the Camera is