HCO SG560C - Manual (Page 12)

HCO ScoutGuard SG560C
3 Quick Introductions
Page 9
Press to manually capture photos or record videos. Press
again to stop the manual capturing of a video.
3.4.4 View Images
or Videos
There are two ways to view the captured images or videos:
1. LCD screen on the control
2. TV monitor which connect to camera with TV cable
Press to view images or videos, the latest image or video will
be shown in the LCD screen on the control or TV monitor. Press
“▲” or “▼” to view the previous or next image or video.
3.4.5 Delete Images
or Videos
Press DEL to delete images or videos .Note the DEL button
just works in Playback state. So if it’s in Preview state, you should
press to enter into Playback state.
3.5 Triggering modes
There are 3 triggering modes of the camera: PIR triggering，
Timer triggering and PIR& Timer triggering.
3.5.1 PIR Triggering
PIR triggering is the default setting. The camera works only
when motions get detected, while, if PIR Trigger is set to OFF,
the camera will stop PIR triggering.
3.5.2 Timer triggering
The Time Lapse Default setting is OFF which means the
timer triggering is disabled. While changing the Time Lapse to a