E-flite Six-Series Brushless 2000Kv Motor (28mm) - Manual

Six-Series Brushless 2000Kv Motor (28mm x 36mm)
Instructions
Thank you for purchasing the E-flite Six-Series Brushless 2000 Kv Motor. Six-Series Brushless 6-pole motors
are high torque motors suitable for either direct drive or geared applications. They feature the same diameter
and mounting hole pattern as brushed 400 and 480 motors so they make excellent upgrades for these classes
of models. Six-Series motors are ideal for direct drive applications such as hotliners and other LMR products
18- to 28-ounces. They are also ideal for 3D and aerobatic models weighing 28- to 35-ounces, and for scale
park flyers weighing 25- to 40-ounces, when using a gearbox. They’re an especially good match for the
ParkZone F-27B Stryker (PKZ1200), flying wings and hotliners when used direct drive, and for aerobatic and
3D models like the E-Flite Brio 10 (EFL2275) when using a gearbox.
Six-Series BL 2000Kv Motor (28mm x 36mm) Features:
• Perfect match for 3D and aerobatic models 28- to 35-ounces (790- to 990-grams) using a gearbox
• Ideal for scale park flyers 25- to 40-ounces (710- to 1140-grams) using a gearbox
• Ideal direct drive motor in models 18- to 28-ounces (510- to 800-grams)
• Ideal for models requiring up to 300 watts of power
• Perfect upgrade for brushed 400 and 480 motors with same diameter and mounting hole pattern
• High Torque, 6-pole slotted rotor design
• Includes connectors, prop adapter, and mounting hardware
• High quality construction with ball bearings and hardened steel 3.2mm shaft
Six-Series Specifications
Diameter: 28mm (1.1 in)
Case Length: 36mm (1.4 in)
Weight: 80g (2.9oz)
Shaft Diameter: 3.2mm (.125 in)
EFLM2000
Kv: 2000 (rpms per volt)
Io: 1.76A @ 10V (no load current)
Ri: .06 ohms (resistance)
Continuous Current: 26A*
Max Burst Current: 32A*
Watts: up to 300
Cells: 6-10 Ni-MH/Ni-Cd or 2-3S Li-Po
Recommended Props: 5 x 4 to 7 x 6 direct drive or 10 x 6 to 12 x 8 with 2:1 to 3:1 gearbox
Brushless ESC: 35A - 40A (EFLA312B)
* Maximum Operating Temperature: 220 degrees Fahrenheit
* Adequate cooling is required for all motor operation at maximum current levels.
* Maximum Burst Current duration is 15 seconds. Adequate time between maximum burst intervals is required
for proper cooling and to avoid overheating the motor.
* Maximum Burst Current rating is for 3D and limited motor run flights. Lack of proper throttle management may
result in damage to the motor since excessive use of burst current may overheat the motor.
Battery Choices:
There are many Li-Po battery brands on the market with several choices for consumers. We recommend either
E-flite or Thunder Power batteries and list some possible choices for the Six-Series motor, all depending on the
airplane application. NOTE: Battery technology is constantly changing and improvements are made often.
Some part numbers below may change as improved versions are introduced.
EFLB1021 7.4V 1800mAh 2-Cell LIPO,16GA
THP19002S 1900mAh 2 cell 7.4V LIPO,16GA
EFLB1025 11.1V 1800mAh 3-Cell LIPO,16GA THP19003S 1900mAh 3-Cell 11.1V LIPO,16GA
EFLB1031 7.4V 2100mAh 2-Cell LIPO,16GA THP20002SPL 2000mAh 2-Cell 7.4V LIPO,16GA
EFLB1035 11.1V 2100mAh 3-Cell LIPO,16GA THP20003SPL 2000mAh 3-Cell 11.1V LIPO,16GA
THP21002SPL 2100mAh 2-Cell 7.4V LIPO,16GA
THP21003SPL 2100mAh 3-Cell 11.1V LIPO,16GA