E-flite Alpha 450 Sport ARF - Manual (Page 7)

7 E-flite Alpha Sport 450 ARF Assembly Manual
 13. There is a small hole in the micro pushrod
connector that is slightly larger than the pushrod
wire. Insert the aileron pushrod wire in this hole
and slide the servo horn assembly on the aileron
pushrod wire.
 14. Attach the servo arm to the aileron servo.
Make sure the horn is aligned parallel to the hinge
line of the aileron, and that the servo horn is facing
toward the wing tip. Use the screw removed in Step
1 and a #0 Phillips screwdriver to secure the servo
horn to the aileron servo.
 15. Use a #1 Phillips screwdriver to install the 2mm
x 4mm machine screw that will be used to secure
the aileron pushrod wire to the micro pushrod
connector. The alignment of the servo and aileron
will take place later in this manual.
Use threadlock on all metal-to-metal fasteners
to keep them from vibrating loose.
 16. Repeat Steps 1 through 15 to install the
remaining aileron servo and linkage.
Installing the Nose Gear
Required Parts
Fuselage assembly Nose gear assembly
Nose gear steering arm
3mm x 4mm machine screw
Required Tools and Adhesives
Threadlock Phillips screwdriver: #2
 1. Slide the nose gear steering arm on the prebent
nose gear steering pushrod. The flat side of the
nose gear steering arm will be facing away from
the firewall.