E-flite Apprentice 15e RTF with DX5e Radio - Manual (Page 20)

20 E-flite Apprentice Assembly Manual
Throttle/Rudder Stick
Elevator/Aileron Stick
Reversing Switches
Mix Switch (not used for Apprentice)
Throttle Trim
Rudder Trim
Aileron Trim
Elevator Trim
HI/LO
Rate Switch
Mode 2 Transmitter
Centering the Control Surfaces and
Checking Control Direction
Required Parts
Assembled airframe Flight battery
Transmitter
Note: This section is designed to help you become
acquainted with the operation of the radio in correlation
to the model. If a flight control moves in the incorrect
direction we will instruct you how to change it in the
next section. As always, read through the radio manual
which explains the features of your radio system.
 1. Turn the radio on using the power switch on the front
of the transmitter and check that the throttle stick is at its
lowest position. The throttle stick needs to be in the idle/
off position, otherwise the speed control will not arm
in the next step. The DX5e transmitter features digital
trims, so they should be centered when the transmitter is
powered on.
Switch