Checking the receiver – E-flite Apprentice 15e RTF with DX5e Radio User Manual

Page 10

E-flite Apprentice Assembly Manual



3. Locate the main gear and press it into the slot in the

fuselage that is behind the battery compartment on the

bottom of the fuselage. You may need to flex the landing

gear wire inwards towards itself to get it to fully seat

inside the slot.

Checking the Receiver

Required Parts

Fuselage Assembly



1. Check that the servos and speed control are plugged

into the receiver properly. The speed control is plugged

into the slot marked "THRO", the smaller servo in the

slot marked "ELEV", the larger servo in "RUDD" and the

connector that has the two leads for the ailerons into the

slot marked "AILE."