Battery installation – E-flite Apprentice 15e RTF with DX5e Radio User Manual

Page 14

E-flite Apprentice Assembly Manual



11. Install the last four rubber bands using the Steps 9

and 10 as a guide. You will install two across (as in step

9) and then two in line (as in step 10), and then two

across (as in step 9) and then two in line (as in step 10),

and so on until there are no more rubber bands.

Battery Installation

Required Parts

Assembled airframe

3200 3S 11.1 V LiPo battery (charged)



1. Turn the battery hatch keeper 90 degrees to release

the hatch.