E-flite Apprentice 15e RTF with DX5e Radio - Manual (Page 17)

17 E-flite Apprentice Assembly Manual
 5. Slide the battery cover back into position on the back
of the transmitter.
Note: The installation of the batteries is also covered
in your radio manual. Please read through the radio
manual to familiarize yourself with the operation of your
radio system.
Removing the Propeller
Required Parts
Fuselage assembly
Required Tools
Adjustable wrench
Important: Before performing any maintainance to the
motor, make sure the battery has been unplugged and
removed from your model to prevent injury. Also remove
the propeller when checking the radio system to prevent
any personal injury if the motor were to start.
 1. Remove the spinner cone from the spinner. It should
snap away from the backplate with a little force.