E-flite Apprentice 15e RTF with DX5e Radio - Manual (Page 11)

11 E-flite Apprentice Assembly Manual
Wing Installation
Required Parts
Wing panel (right and left) Wing cover, front
Wing cover, rear Rubber band (8)
Fuselage assembly
 1. Align the carbon wing tube with the socket in the
opposite wing panel. Slide the two panels tightly together.
 2. Locate the front and rear wing covers. The front cover
has a rounded edge, while the rear has a squared edge.
Hint: You may want to practice the next steps before
removing the backing from the adhesive tape on the
wing covers. The adhesive will stick as soon as it touches
the wing surface.
 3. Remove the backing from the adhesive tape on the
front wing cover.