E-flite Ultimate 3D Profile ARF - Manual (Page 27)

27
❍ 4. Secure the pushrod to the control horn using
a micro pushrod keeper. Trim the excess
wire.
❍ 5. Repeat Steps 1 through 4 for the opposite
ailerons.
26
❍ 2. Make an L-bend in one end of a pushrod
wire. Attach the wire to the bottom control
horn using a micro pushrod keeper.
❍ 3. Mark the pushrod where it crosses the hole
in the upper control horn. Make a 90-degree
bend at the mark.